Everything Sydney homeowners ask before ringing an emergency plumber

All questions

• How much does an emergency plumber cost in Sydney?

  Pricing

  Standard emergency rate runs AUD 120-160 per hour for genuine emergencies any hour of any day, including weekends and public holidays. After-hours premium ($180-300/hr) only applies to non-urgent work specifically booked outside business hours for convenience. Most burst pipe repairs land between $200-800; blocked drain clearances $150-400; hot water replacements $1,200-3,500.
• Do you charge a call-out fee?

  Pricing

  No separate call-out fee. Travel and the first 30 minutes of on-site diagnosis are included in the standard hourly rate. Some Sydney emergency plumbers add $80-200 call-out on top of their hourly rate; we don't.
• Are weekend and public holiday rates the same?

  Pricing

  For genuine emergencies, yes — same standard rate any hour, any day. Christmas Day, New Year's, ANZAC Day, public holidays all charged the same as a Tuesday morning. The premium rate only applies to non-urgent work specifically booked outside business hours.
• How do you handle parts pricing?

  Pricing

  Parts at supplier cost plus a flat 15% markup. No surge pricing on Sundays, no "emergency" markup. Major parts (hot water units, full replacement components) are quoted as fixed-price install jobs rather than time-and-materials.
• Do you offer fixed-price quotes?

  Pricing

  For larger jobs (full hot water system replacement, sewer relining, slab leak repair), yes — fixed-price quote in writing before any work starts. For straightforward emergency call-outs, time-and-materials with a quoted ceiling. If scope expands once we're on-site, we stop and re-quote.
• How fast can you actually get to my Sydney suburb?

  Response Times

  Sixty minutes door-to-door is our average across the Sydney metropolitan area. Inner-ring suburbs (CBD, Inner West, Eastern Suburbs) typically see a plumber inside 30-45 minutes. Outer Western Sydney, Hills District and the Northern Beaches usually fall in the 60-90 minute window — longer during East Coast Lows.
• Are you really open 24/7 or just listed that way?

  Response Times

  Actually 24/7. Requests are taken around the clock and go to licensed local plumbers on call across the Sydney metro.
• What happens if you're slammed during a storm?

  Response Times

  During the wet season (October to March) more local plumbers are on call across the metro. During major East Coast Low events requests are sometimes triaged by severity (active leaks first, repairs that can wait second), but service stays available.
• How does after-hours response actually work?

  Response Times

  Your form submission is taken at any hour. A licensed plumber based in your part of Sydney replies with a quote range and an ETA as soon as one is available, and heads your way. Door-to-door at 3am is typically faster than business hours — no traffic to fight.
• Are you licensed and insured?

  Licensing & Insurance

  Every plumber we send holds a current NSW Fair Trading plumbing licence (verifiable at fairtrading.nsw.gov.au), with a gasfitter's licence on top where the work involves gas. The plumber who attends carries their own public liability insurance — ask for the certificate of currency if you need it.
• How can I verify the plumber's licence number?

  Licensing & Insurance

  Ask the plumber for their licence number when they confirm the quote — they carry their licence card and the number should appear on their quote, invoice and any compliance certificate. Check it at fairtrading.nsw.gov.au. We encourage clients to check, particularly for larger jobs.
• Why do plumbers and gasfitters have separate licences in NSW?

  Licensing & Insurance

  Under the NSW Gas and Electricity (Consumer Safety) Act 2017, gasfitting is regulated separately because of higher safety risk. Plumbers without a current gasfitter's licence cannot legally work on gas lines. For jobs like hot water replacements we send a plumber who holds both, so a single tradesperson can complete both sides.
• Will my home insurance cover the damage?

  Licensing & Insurance

  NSW home and contents policies generally cover sudden, unexpected water damage from burst pipes — but not the cost of fixing the pipe itself. Ask the plumber for photos, a written report and an itemised invoice — that is what NRMA, AAMI, Allianz, Suncorp and CommInsure typically ask for.
• What kinds of emergencies do you handle?

  Services

  Burst pipes (copper, PEX, polybutylene, galvanised, slab leaks), blocked drains (CCTV diagnosis + electric eel + hydro-jet + root cutting), no hot water (Rheem and Rinnai systems), gas leaks (licensed gasfitter, compliance certificates), toilet repairs (Caroma parts), plus general 24/7 emergency call-outs.
• Do you do strata and body corporate work?

  Services

  Regularly. We can liaise directly with your strata manager, supply itemised invoices for cost-split sign-off, provide CCTV documentation for common-property versus lot-owner allocation. Particularly common across CBD, Pyrmont, Surry Hills, Bondi, Chatswood and Parramatta high-rise stock.
• Can you handle commercial properties?

  Services

  Yes — restaurant grease traps, medical-grade waste plumbing, industrial trade waste, retail strata, hospitality precincts. Particularly active across Crown Street, Norton Street, Willoughby Road, Brookvale Industrial Estate, and the Westmead/Liverpool/Sutherland hospital precincts.
• Is the work guaranteed?

  Services

  Workmanship guarantees are offered by the plumber who does the job — ask what it covers and for how long before work starts, and get it in writing on the invoice. Manufacturer warranties on parts (Caroma, Rheem, Rinnai, Bosch) pass through directly.
• Do you do gas appliance work?

  Services

  Yes — cooktop and oven gas connections, hot water unit gas valves and pilot assemblies, gas heater servicing, BBQ gas line connections. Anything downstream of the meter and connected to the gas supply is gasfitter territory; the plumber we send for gas work holds the gasfitter's licence.
• Can you replace my hot water system?

  Services

  Like-for-like Rheem-to-Rheem and Rinnai-to-Rinnai replacements scheduled within 24 hours where stock allows. Heat pump upgrades quoted with NSW Energy Savings Scheme rebate paperwork handled. Old unit disposal included. Compliance certificates issued for any gas-connected install.
• What suburbs do you service?

  Coverage

  All Sydney metropolitan area: Eastern Suburbs (Bondi to Maroubra), Inner West (Newtown to Balmain), North Shore (North Sydney to Hornsby), Northern Beaches (Manly to Palm Beach), Western Sydney (Parramatta to Penrith), Hills District (Castle Hill to Rouse Hill), Sutherland Shire (Cronulla to Engadine), and the CBD.
• Do you cover outer suburbs and the Blue Mountains?

  Coverage

  Sydney metropolitan area is our standard coverage. Penrith and Liverpool sit at the western edge — beyond there into the lower Blue Mountains we'll be honest about response times before dispatching. Outside the basin entirely, we'll often recommend a local trade rather than commit to an unrealistic ETA.
• What if my suburb isn't on your list?

  Coverage

  The 30+ suburbs in our coverage directory are the ones we attend regularly enough to keep parts pre-stocked. We service the entire Sydney metro — drop your suburb on the quote form and we'll respond with a real ETA before any dispatch.
• What happens after I submit the quote form?

  Process

  First: a reply with a quote range, a real ETA, and the name of the licensed local plumber attending. Within the hour: plumber on-site (Sydney metro average). On arrival: diagnosis, quote in writing, your approval, then repair. Job complete: payment to the plumber, receipt and any warranty paperwork from them.
• How do I pay?

  Process

  Card on the spot (Visa, Mastercard, AMEX), EFTPOS, or bank transfer. Larger jobs (over $2,500) can be split into deposit and completion payments. We don't accept cash for jobs over $1,000 — keeps the paperwork clean for insurance claims.
• What should I do before the plumber arrives?

  Process

  Isolate the supply at the meter (water leaks) or the gas meter (gas smell). Move soft furnishings out of any water reach. Photograph the affected area for insurance. If you can't find the meter or shut off the supply, ring the number in your quote text — the plumber will talk you through it.
• What if the job ends up bigger than the original quote?

  Process

  If scope expands once we open up walls or floors, we stop and re-quote in writing before continuing. You decide whether to proceed. The original quote stands for the original scope — no quietly extending the bill.
• Can I just fix this myself?

  DIY & Safety

  Tightening a leaking flexi-hose at the wall isolation valve is fine. Cutting and rejoining pressurised water lines, working on gas lines, or any electrical-adjacent plumbing is not. Unlicensed plumbing work voids the relevant section of your home insurance and can void manufacturer warranties on installed parts.
• What do I do if I smell gas?

  DIY & Safety

  Don't operate any electrical switches (lights, fans, phones). Open doors and windows. Get everyone outside. Ring 131 909 (the Jemena Gas Networks emergency line) from outside the building. They make supply safe at the network level. Then ring us for the repair and compliance certificate. If anyone feels unwell, ring 000.
• Should I use chemical drain cleaners while waiting?

  DIY & Safety

  Almost never. Caustic drain cleaners damage older galvanised and copper pipework, void PEX manufacturer warranties, don't actually break down hair plugs or root masses, and create hazardous splash-back for the next person who opens the drain. Save the $25 and ring us instead.
• How do I shut off the water at my meter?

  DIY & Safety

  The meter is usually at the front boundary inside a small in-ground green box. The shut-off valve is the lever or tap on the house side of the meter — turn it perpendicular to the pipe (90°) to close. Worth photographing where yours sits before there's an emergency.
• Is hot water unit pilot light re-lighting a DIY job?

  DIY & Safety

  Not in NSW — re-lighting pilot lights on gas hot water units is licensed gasfitter work under the Gas and Electricity (Consumer Safety) Act 2017. The job itself is straightforward but doing it as an unlicensed homeowner voids manufacturer warranty and creates insurance complications if anything subsequently goes wrong.
• Why does Western Sydney get so many slab leaks?

  Local Sydney

  Reactive clay soils. Western Sydney sits on clay that expands during wet seasons (every La Niña year) and contracts during dry spells. Buried copper hot water lines under slabs get shoved sideways by the soil movement, opening up old joints and cracking fittings. Slab leaks typically appear 12-24 months after major rain events.
• Why do Eastern Suburbs hot water units fail so quickly?

  Local Sydney

  Salt-air corrosion. Eastern Suburbs and Northern Beaches sit in an aerosol corrosion zone — within about 5 km of the coast, copper cladding and external fittings pit and corrode within 8-10 years. Marine-grade fittings on replacement extend service life noticeably.
• What's the deal with Inner West heritage pipework?

  Local Sydney

  Most pre-1920 Inner West housing still runs on a mix of original galvanised and lead service lines, often with 1970s polybutylene retrofits behind plasterboard from renovation-era work. Galvanised pinholes after 50-60 years; PB shatters under pressure without warning. Section re-pipes in PEX usually solve both.

No questions match. Try a different keyword or category.